This USB to RS232 serial programming cable is designed for configuring, tuning, and communicating with compatible Leadshine stepper motor and hybrid servo drives.
Featuring an FTDI FT232RL USB serial controller and a 6P6C modular connector, this cable provides a convenient connection between a Windows computer and compatible Leadshine drive controllers.
It is suitable for motor drive parameter configuration, system tuning, troubleshooting, and maintenance through compatible Leadshine software.
Chipset: FTDI FT232RL
Interface: USB to RS232 Serial
USB Connector: USB Type-A
Device Connector: RJ11 / RJ12 6P6C
Communication: RS232 Serial Communication
Application: Programming, configuration, and tuning
Cable Type: USB Serial Communication Cable
Designed for use with the following Leadshine stepper motor and hybrid servo drives:
3DM2283
DM2282
DM805AI
EM882S
DM1182
DMA882S-IO
HBS86H
Note: Please verify the communication port and pinout of your specific drive model before purchasing.
Leadshine stepper motor drive programming
Hybrid servo drive parameter configuration
Motor current and control parameter adjustment
Position following error configuration
Drive commissioning and troubleshooting
Industrial automation equipment maintenance
Connect the USB Type-A plug to your computer.
Connect the RJ11/RJ12 6P6C connector to the compatible Leadshine drive.
Install the appropriate FTDI USB serial driver.
Check the assigned COM port in Windows Device Manager.
Open compatible Leadshine configuration or tuning software.
Select the correct COM port to establish communication with the drive.
FTDI Virtual COM Port (VCP) drivers are available for:
Windows 11
Windows 10
Windows 8.1
Windows 7
macOS
Linux
This is an RS232 communication cable, not an RS485 or TTL UART cable.
Compatible software and correct communication settings are required.
Different Leadshine drive models may have different connector pin assignments.
Please check the drive's communication interface before ordering.
