The Icom CI-V USB CAT Control Cable is designed to connect compatible Icom transceivers to a computer for CAT control, frequency monitoring, and radio communication.
Featuring an FTDI FT232RNL USB interface and a dedicated CI-V signal conversion circuit, this cable provides a convenient USB connection for controlling compatible Icom radios without requiring a separate CT-17 interface.
The cable supports Icom CI-V communication, allowing compatible radio control software to communicate with your transceiver through a virtual COM port.
USB Interface: Connects directly to a computer's USB port.
FTDI FT232RNL Chipset: Provides reliable USB-to-serial communication.
CI-V Signal Conversion: Designed for Icom's single-wire bidirectional CI-V communication protocol.
CAT Control: Supports radio frequency control, monitoring, and compatible CAT operations.
Virtual COM Port: Creates a COM port for compatible radio control software.
CT-17 Alternative: Provides a USB-based CI-V interface without requiring a separate CT-17 converter.
Compatible with Icom radios equipped with the standard CI-V remote control interface, subject to connector and wiring compatibility.
| Item | Specification |
|---|---|
| Product Type | USB CI-V CAT Control Cable |
| USB Chipset | FTDI FT232RNL |
| Computer Interface | USB |
| Radio Communication | Icom CI-V |
| Communication Mode | Single-Wire Bidirectional |
| Radio Connector | 3.5mm CI-V Plug |
| Interface Circuit | CI-V Signal Level Converter |
| Driver | FTDI VCP Driver |
| Application | CAT Control / Radio Communication |
| Compatible Brand | Icom |
This cable can be used with compatible Icom radio control software for:
Frequency monitoring and adjustment
Radio remote control
CAT communication
Radio configuration and operation
Integration with compatible amateur radio software
Note: Available CAT functions depend on the radio model and supported software commands. Older models may not support PTT control through CI-V.
Install the FTDI Virtual COM Port (VCP) driver before using the cable.
After connecting the cable to your computer, check Windows Device Manager to identify the assigned COM port. Select the corresponding COM port in your radio control software.
FTDI Driver Download:
https://ftdichip.com/drivers/vcp-drivers/
1 × Icom CI-V USB CAT Control Cable
